Τηλεφωνικές Παραγγελίες | Δευτέρα - Παρασκευή | 9:00 πμ - 2:00μμ

Τηλέφωνο Επικοινωνίας

HW-300S Ψηφιακός Μετρητής Πάχους Χρώματος Αυτοκινήτου 0.1micron/0-2000um - Digital Car Paint Thickness Meter Gauge Horizontal screen- Black

OEM, HW-300S, Μαύρο
Γράψτε μια κριτική
Τιμή Τιμοκαταλόγου: 39,00
37,90
Κερδίζετε: €1,10 (3%)
HW-300S
1801622
Παράδοση σε 1-3 ημέρες
+

HW-300S Ψηφιακός Μετρητής Πάχους Χρώματος Αυτοκινήτου 0.1micron/0-2000um

Digital Car Paint Thickness Meter Gauge Horizontal screen

Αυτό το προϊόν χρησιμοποιείται για τη μέτρηση του πάχους μη αγώγιμων επιστρώσεων σε μεταλλικές επιφάνειες, καθώς και σιδηρομαγνητικών μετάλλων (όπως σίδηρος, νικέλιο, κοβάλτιο κ.λπ.), όπως το πάχος της βαφής στην επιφάνεια των αυτοκινήτων, το πάχος επιστρώσεων σε μεταλλικά μέρη, και ούτω καθεξής.

Αυτό το προϊόν διαθέτει επίσης έναν ενσωματωμένο ανιχνευτή διπλής αρχής μαγνητικής επαγωγής και δινορευμάτων, ο οποίος μπορεί να αναγνωρίσει αυτόματα το μεταλλικό υπόστρωμα που πρόκειται να δοκιμαστεί. Χρειάζεται μόνο να τοποθετηθεί στο μεταλλικό υπόστρωμα που θα δοκιμαστεί και το πάχος της επίστρωσης μπορεί να υπολογιστεί αυτόματα.

Specification:
Product name: HW-300S coating thickness gauge
Material: ABS + electronic components
Product size: 120x45x23mm/4.72x1.77x0.91in
Resolution: 0.01mm/1mil
Measuring range: 0-2000UM
Measurement accuracy: ±(3%+1UM)
Minimum measuring area: 20mm/0.79in in diameter
Resolution: 0um-99.9um (0.1um) 100um-999um (1um)1000um (0.01mm)
Power supply: 2 X 1.5V AAA batteries (not included)
Operating temperature: -10 degrees Celsius and 50 degrees Celsius
Working environment temperature: 0-50°C, 20-90% relative humidity (non-condensing)
Zero calibration: Support
Statistics: Average, minimum, maximum, quantity
Certification: CE
Color: Black, Orange
Screen diaplay: Horizontal/Vertical

Measurement steps:
Step 1: Prepare the parts to be tested.
Step 2: Stay away from metal objects at least 2 cm, press the switch to open.
Note: It is recommended to perform a zero adjustment test on the instrument with reference to "Zero Calibration" before calibration.
Step 3: Place the probe vertically and quickly on the surface to be measured until you hear a dripping sound, display the measured value on the screen, and then lift the probe at least 2 cm away from the screen to measure the part to be measured, you can perform the next measurement.
Note: If the automatic shutdown function is turned on and there is no operation within 3 minutes, the instrument will automatically turn off.

There are two calibration methods for this machine:
1. Basic calibration: Basic calibration should be performed when it is used for the first time, or when it has not been used for a long time, or when the tested substrate is replaced.
There are 7 calibration methods for basic calibration points, and the calibration unit is millimeters.
A. Prepare 6 standard films with a thickness of 0.04 - 0.06, 0.09 - 0.11, 0.22 - 0.28, 0.45 - 0.55, 1.90 - 1.05, 1.90 - 2.00.
B. First press and hold the up button, and then press the on button, the LCD displays the kettle on the full screen, and then hears BI, the LCD displays 00mm, and the LCD displays the CAL character at the bottom right corner of the LCD. Release the up button to indicate to enter the calibration screen.
C. Gently press the probe on the uncoated aluminum base, the LCD displays 0.00 at this time, and then BI-BI calibration twice.
D. Remove the probe and display a 0.05mm number on the LCD. The second digital calibration is to gently press the probe on the aluminum base where the calibration sheet is placed.
After adjusting the value displayed on the LCD and the thickness of the calibration sheet, press the up and down keys to remove the probe and Bibi sound. The second calibration point has been calibrated.

Include:
1 X Thickness Gauge
1 X Instruction
6 X Calibration Sheet

ΣΗΜΕΙΩΣΗ:

Εξειδικευμένα προϊόντα, προϊόντα μικρής κυκλοφορίας και προϊόντα OEM συνήθως συνοδεύονται από εγχειρίδιο οδηγιών στην Αγγλική γλώσσα και όχι στην Ελληνική. Παρακαλούμε λάβετε υπόψιν σας το γεγονός αυτό πριν τοποθετήσετε την παραγγελία σας.

Κατασκευαστής:
OEM
Εγγύηση:
1 έτος

Γενικά Χαρακτηριστικά

Μοντέλο:
HW-300S
Χρώμα:
Μαύρο

Δε βρέθηκαν Κριτικές


Δωρεάν μεταφορικά σε προϊόντα μας.*

Επιπλέον εκπτώσεις σε ποσοτικές παραγγελίες


15 ημέρες εγγύηση επιστροφής χρημάτων

Έχετε 15 ημέρες εγγύηση επιστροφής χρημάτων


Τεχνική υποστήριξη!

Εξειδικευμένο προσωπικό πάντα δίπλα σας.


Βγείτε κερδισμένοι!

Καθημερινές, ασυναγώνιστες προσφορές.